Cold Rolling Mill (12)
Cold Reducing Mill (1) Cold Pilger Mill (5) Cold Rolling Machine (2) Roll Assembly (2) Pass-Roll Assembly (1) Mandrel (1) Straightening Machine (5) Straightener (2) Straightener Roll (2) Seamless Pipe (4) Stainless Steel Pipe (1) Titanium Pipe (1) Alloy Pipe (1) Copper Pipe (1)
;){kind=small}
1. Technical parameter of product
No. |
Item |
Technical parameter |
1 |
outer diameter of rough tube |
76∼ |
2 |
wall thickness of rough tube |
6∼ |
3 |
length of rough tube |
2500∼ |
4 |
outer diameter of finished products |
60∼ |
5 |
wall thickness of finished products |
2.5∼ |
6 |
Max.coefficient of elongation |
stainless steel≤4 |
2. Technical parameter of machine.
NO. |
Item |
Technical parameter |
1 |
crank radius |
|
2 |
diameter of roller |
|
3 |
efficient length of groove |
|
4 |
round trip length of operating frame |
|
5 |
round trip frequency of operating frame |
55∼70 times/min |
6 |
feeding amount |
3 |
7 |
swing angle of rough tube |
41º-52º |
8 |
mandrel crack detection device |
Have |
9 |
material loading method |
Side loading |
10 |
continuous rolling |
No |
11 |
feeding and turning method |
Single feeding ,double turning |
12 |
rolling lines |
single |
13 |
power of main motor |
DC: 250KW |
Material output table is not included.
External dimension: (length* width* height) ≈28235*6400*2260
 Deutsch |
 Español |
 Français |
 Italiano |
 Português |
 日本の |
 한국어 |
 العربية |
 български |
 hrvatski |
 česky | |
 Dansk |
 Nederlands |
 suomi |
 Ελληνικά |
 हिन्दी |
 norsk |
 Polski |
 Română |
 русский |
 Svenska |
 中文 |
